Consort CRXSL-01 Manuale d'installazione e d'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Controllore Consort CRXSL-01. Consort CRXSL-01 6. Single zone wireless controller
Stampa la pagina
9. PROG - Automatic time mode
In this mode, the CRXSL will follow the week's time /
temperature programme.
You can override the temperature in PROG mode by simply
activating the CRXSL and using the
new temperature. The new set temperature will be then
maintained until the next program step.
Touch
to ADVANCE program, touch again to go back.
11. Set 7-day programme
An example of one day programme on CRXSL
PROGRAM 1
ºC
20
19ºC
10
06:00
11. Set 7-day programme (cont'd)
Logic diagram for setting programme on CRXSL
11. Set 7-day programme (cont'd)
The CRXSL has a 7-day timer with up to 6 programming steps
available for each day. In the programming you can set a
start time and a temperature for each programme. Each
programme has to be used or set inactive.
I3984093 Iss 01
or
icon to set the
PROGRAM 2
4ºC
08:00
12:00
- SET MINUTES
- SET HOURS
- SET DAY
- SELECT DAY TO SET
- SELECT PROGRAM TO SET
- SET MINUTES FOR PROGRAM
- SET HOURS FOR PROGRAM
- SET TEMPERATURE FOR PROGRAM
10. SETB - Setback mode
Setback mode can be used for frost protection, situations
where a minimum room temperature must be maintained, or
to disable the heating completely .
To set the temperature touch
temperature drops below the set temperature the heating
will be active.
To disable heating lower the temperature to below 4ºc and
she screen will show '- - -' The heating is now disable.
3
PROGRAM
PROGRAM
22ºC
16ºC
14:00
1. Touch and hold
setting.
2. The minutes will flash.
3. Touch
4. To set hour, touch
5. Touch
6. To set day, touch
7. Touch
8. Touch
9. Touch
10. Touch
This is indicated by the flashing number.
11. Touch
12. Touch
13. Touch
14. Touch
15. Touch
16. Touch
or
PROGRAM 5
4
22ºC
16:00
22:00
for 5 seconds to enter the time
or
to set the minutes.
and the hour will begin to flash.
or
to set the hour.
and the day will begin to flash.
or
to select the day.
to access the 7-day programming mode.
or
to select the day you want to set.
to set programme 1 for selected day.
to select minutes.
or
to set minutes.
to select hour.
or
to set hour.
to select temperature setting.
or
to set temperature.
.When the room
PROGRAM 6
10ºC
3