Constellation Altair II Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Constellation Altair II. Constellation Altair II 19.

If your Altair II does not function correctly, refer to the Troubleshooting section at the end of this

manual. If you are still unable to resolve the problem, contact your Constellation Audio dealer.

If any liquid is spilled on the preamp, or if any metal object (such as a staple or a paper clip) is

inadvertently forced inside, immediately disconnect the AC power and contact your Constellation Audio

dealer.

Source device and amplifier connections

On the rear of the Altair II preamp there are eight XLR inputs, four on each side. As you are looking at

the rear panel, the left four XLR inputs are for the right channel, the right four inputs are for the left

channel. Underneath each jack is the corresponding input number. Use of XLR connections is

recommended for the best possible audio quality. To remove an XLR plug, push on the tab above the

jack and pull the plug out.

IMPORTANT NOTE: To preserve true dual-mono operation, the Altair II uses a symmetrical circuit

layout. This configuration requires that the Altair II's back panel connections be laid out a little

differently from those on most preamps. For example, the left-channel connection for Input 1 is at the

far right side of the back panel, and the right-channel connection is at the far left side. Connecting the

cables in the usual side-by-side fashion will result in an incorrect installation and the mixing of sounds

from different source devices.

The input numbers from left to right, looking at the back of the Altair II are:

, 2

, 3

, 4

——4

, 3

, 2

, 1

right

left