Dantherm 094838 Manuale - Pagina 4
Sfoglia online o scarica il pdf Manuale per Controllore Dantherm 094838. Dantherm 094838 20.
Stampa la pagina
Schematic installation
Installation procedure
4
Installation
Follow these steps to install the CC3000 upgrade Kit for Free Cooling Units.
Step
1
Make sure that the power to the Free Cooling Units is disconnected.
2
Find a location for satellite box and the CC 3000.
Satellite box as close to unit as possible.
3
Cut the power supply- and communication cable in right length to be connected to
the satellite box
4
Connect to satellite box
5
Connect the satellite box to the CC3000 with the included 8 wire cable.
6
Connect the enclosed Room temperature sensor to CC3000, place the sensor element
at same place as present sensor.
The temperature sensors from ACUE and TKS3000 will not work with CC3000
7
Outdoor temperature sensor. Connect the included temperature sensor to the satellite
box and locate the sensor element outdoor an appropriate place.
8
Connect power to the satellite box (plug is included in the kit package)
9
Insert the included SD cart into the CC3000.
The SD card contains several Configuration files for different products
10
Select the right Config file at the menu of CC3000
•
FB 450 AC
•
FB 450 DC
•
DFC 350 DC
•
DFC 450 DC
•
DFC 350 AC
•
DFC 450 AC
11
See the enclosed CC3000 instructions manual for changing settings
12
The new CC3000 controller is now ready for service
Action