Cast S226S Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Stufa a legna Cast S226S. Cast S226S 16.

3. Important information about installing and using the

stove

All national and local regulations, Including those referring to national and

European standards, need to be complied with when installing the stove.

The stove must be installed by a registered installer or approved by your local

building control officer.

Only use for domestic heating purposes only.

Burn only approved fuels (Wood fuel). Do not use petroleum based products or

use as an incinerator.

This stove will become very hot whilst in operation and due care should be taken.

Thick gloves should be used to operate the primary/secondary controls or

reaching inside the stove to position fuel or remove ash. Do not place flammable

objects on or near the stove.

It is possible to fire the stove beyond its design capacity.This could damage the

stove,so watch for signs of overfiring - if any part of the stove starts to glow red,

the stove is in an overfire situation and the controls should be adjusted

accordingly.Never leave the stove unattended for long periods without first

adjusting the controls to a safe setting.Careful air supply control should be

exercised at all times.

The stove must NOT be installed into a chimney that serves any other appliance

and is suitable for intermittent burning.

Do not make unauthorised changes or modifications to the stove

The stove and chimney flue must be regularly cleaned . It is especially important

to check for blockages following a prolonged shutdown period. It is recommended

that the stove and flue is regularly maintained by a competent engineer.

4.Unpacking & Assembly

Warning:Due to the weight of the stove it is recommended that two people

perform the unpacking and assembly

Unpacking