Audiotel International 2-197-869 Manuale operativo - Pagina 16
Sfoglia online o scarica il pdf Manuale operativo per Sensori di sicurezza Audiotel International 2-197-869. Audiotel International 2-197-869 16. Non-linear junction detector
Stampa la pagina12
SuperBroom Plus TA – Operating Manual
In DSP mode, SuperBroom automatically sets the power
level relative to the maximum TX level set at start-up in
the 'Set Tx Power' menu. The power control allows the
transmitter power to be reduced from the maximum set
during startup down to level 2.
10 V
C
OLUME
Adjusts the audio output level.
11 H
EADPHONE
Caution Always reduce the volume control to its minimum value
before connecting the headphones. Set the Squelch control
to its minimum value so that the audio level can be gauged
when setting the volume control.
The headphone socket above the Volume control is suitable
for a 1/4 inch 'Stereo' type jack plug. The audio amplifi er is
capable of driving a range of headphone types.
12 B
C
ATTERY
The Battery Charge Status LED is only illuminated when the
external AC/DC Adaptor is supplying power to SuperBroom.
■ When it is illuminated Red the internal battery is being
charged.
■ When it is Green the internal battery is fully charged.
13 O
B
N
UTTON
Press this button to turn the SuperBroom on.
14 O
B
FF
UTTON
Press this button to turn the SuperBroom Off.
15 S
C
ERIAL
OMS
9-way D-type ATE serial interface.
ONTROL
S
OCKET
S
HARGE
TATUS
P
ORT
T
A
H
D
HE
NTENNA
EAD
ISPLAY
The SuperBroom Antenna Head incorporates a bar graph and
a single character LED display.
T
Twist
Twist
Anti-cloc
Anti-clockwise
to loosen
to loosen
B
B
D
D
AR
AR
GRAPH
GRAPH
ISPLAY
ISPLAY
A 16-segment bar graph mimics the signal strength display
for the signal source selected.
COMPARE - displays the difference between the signals
from the two receivers. If the third harmonic is stronger than
the second there is no output.
2nd - displays the signal strength of the second harmonic.
3rd - display the signal strength of the third harmonic.
S
C
INGLE
HARACTER
When unit is set to 'DSP' mode the decimal point on the
single character display will fl ash. When the unit is set to
'MAN' (Manual) mode or 'DSP' mode the character display
indicates the transmitter output power setting in the range:
L 1 2 3 4 5 6 7 8 9 H
AUDIOTEL INTERNATIONAL Ltd – Issue 3.1 (09/2004)
Controls & Indicators
T
Twist Cloc
Twist Cloc
kwise to tighten
kwise to tighten
D
ISPLAY
13