Audiovalve LUMINARE 2015 Manuale di istruzioni - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per Amplificatore Audiovalve LUMINARE 2015. Audiovalve LUMINARE 2015 17. Ultra highend headphone tube amplifier
Stampa la paginaControls and operation on the front and rear panel
On the left side of the front aperture , the 4 jacks for headphones, a mode switch and volume control.
The headphone jacks are connected in parallel when using the 6.3 mm connectors. For the use of XLR
connectors , take the lower bushing for the right ear and the top of the left ear .
Below the 4 headphone jacks is the Mode switch. Use it to select the mode with which you want to hear.
Use the LOW IMP. or OTL or STAX mode if you have a high-impedance headphones (> 100 Ohms) , or
benefit you if your headset has the IMP mode less than 100 ohms impedance , or if you intend to use
speakers. Which musical impedance best suit with your headphones , you have to find out for yourself.
Just turn on the IMPEDANCE switch.
With the black rocker switch under the MUTE switch you can select the source you want to listen to
between input 1 or 2. In open mode when LED light up will be supported INPUT 2. Input 1 are also
equipped with XLR inputs. INPUT 2 is contrructed as loop between the both pairs RCA connectors. On
the right is the power switch. When the unit is in operation, a green LED lights in the switch.
LUMINARE
ultra highend headphone tube amplifier ___________________