4 Happy Kids FRANEK LUX Manuale - Pagina 3
Sfoglia online o scarica il pdf Manuale per Set da gioco e attrezzature per parchi giochi 4 Happy Kids FRANEK LUX. 4 Happy Kids FRANEK LUX 12.
Stampa la paginaEN
GENERAL INFORMATION
Before assembling, read the instructions in full and check the contents of the kit.
Assembly of the toy must be carried out only by adults.
Assembly should be carried out by at least two adults.
Before installation, prepare the ground in the place where the unit will be placed.
Installation at heights should be done on a ladder with caution.
Keep children away from the installation site.
The kit contains assembly parts and packaging material, which should be kept out of the reach
of children.
Keep these manuals for future reference.
The unit must be installed stably!
Only set up the unit on fl at surfaces.
Do not mount it on concrete or fi ne ground (peat, loose sand) - it will cause a lack of stability of the
construction.
It is recommended to set the toy on a level surface at least 2m away from other structures or obstacles
such as fences, garages, houses, hanging branches, clotheslines, or electrical wires.
An activity toy can only be used after it has been properly fi xed to the ground.
Depending on the type of soil, it is recommended to use appropriate fasteners to secure the device to
the ground - this will guarantee its stability during use (an example of fastening is shown in the picture
on the last page of the manual, i.e. digging the anchors into the ground in such a way that the upper
part of the (an example of how to mount the anchors is shown in the picture on the last page of the
manual, i.e. digging into the ground so that the upper part of the anchor protrudes above the surface
in such a way as to allow the toy poles to be screwed to it).
It is recommended to attach anchors to all legs of the device.
The area of the safety zone should be covered with sand, fi ne gravel, or other materials to soften the
fall. A device equipped with a slide must be protected from direct sunlight. To avoid its excessive heat,
it is recommended to place it in the shade or on the north side.
Modifi cations made by the consumer to the original activity toy shall be carried out following the ma-
nufacturer's instructions
LIST OF ITEMS:
A - Ø7x210cm poles
4pcs.
B - Ø7x230cm poles
2pcs.
C - Ø7x250cm poles
2pcs.
D - Ø7x240cm swing poles
2pcs.
E - Ø10x190cm swing beam
1pc.
F - Connecting beam Ø6x150cm 1pc.
G - Bolt Ø4x45cm
2pcs.
H - Platform 76x90cm
1pc.
I - 76x90cm platform with a notch 1pc.
J - Platform 76x114cm
1pc.
K - Sandbox boards 93cm
4pcs.
L - Sandbox boards 90cm
4pcs.
M - Sandbox seat 51cm
2pcs.
N - Beam 3x12x90cm
1pc.
O - Beam 3x7x90cm
1pc.
P - Stile 3,4x4,5x114cm
1pc.
R - Stilts 2x7x86cm
5pcs.
S - Slats 2x4,5x86cm
16pcs.
T - Slats 2x4,5x90cm
6pcs.
U - Slats 2x4,5x114cm
1pc.
W - Railings 88,5cm
9pcs.
X - Railings 112cm
6pcs.
Y - Rail 77,5cm
1pc.
Z - Wall 62x86cm
2pcs.
AA - Wall 62x88cm
1pc.
AB - Material canopy
1pc.
AC - Slide
1pc.
AD - Flat seat
1szt.
AE - Flag slat
1szt.
AF - Flag
1pcs.
FITTING LIST:
1 - Pipe dowel fi xing fl at
2 - Sling for swing
3 - Mushroom lock screw fi 10x150
4 - Mushroom lock screw fi 8x110
5 - Mushroom lock screw fi 6x40
6 - Hex head screw fi 8x140
7 - Hex head screw fi 6x100
8 - Hex head screws fi 6x80
9 - Hex head screws fi 6x40
10 - Nut M10
11 - Washer fi 10
12 - Nut M8
13 - Washer fi 8
14 - Nut M6
15 - Washer fi 6
16 - Blanking plugs M6
17 - Blanking plugs M8
18 - Blanking plugs M10
19 - Screw 5x80
20 - Screw 5x60
21 - Screw 3.5x50
22 - Screw 3.5x40
23 - Screw 3.5x30
24 - Screw 3.5x20
25 - Screw with washer 5x40
1pcs.
2pcs.
1pc.
12pcs.
4pcs.
2pcs.
2pcs.
5pcs.
2pcs.
1pcs.
1pcs.
12pcs.
14pcs.
4pcs.
13pcs.
13pcs.
14pcs.
1pcs.
8pcs.
4pcs.
80pcs.
64pcs.
30pcs.
1pcs.
2pcs.