Duratech LINK Touch DLT10-RGB Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Telecomando Duratech LINK Touch DLT10-RGB. Duratech LINK Touch DLT10-RGB 14.

Stampa la pagina

Display: Status icons

Battery:

Battery capacity

Battery is charging

Battery error (p.19)

Signal:

LinkTouch

Heat pump:

Pool heat pump is ON (idle)

Pool heat pump is ON and heating/cooling

Pool heat pump has an error (p.19)

Pool lights:

Pool lights are connected

Pool lights are ON

There is an error with the pool lights (p.19)

Relays A and B:

Relays A and B used, not the pool cover function

There is an error with relays A and B (p.19)

Pool cover:

Pool cover is opening/closing

Pool cover is closed

Pool cover is open

There is an error with the pool cover (p.19)

is communicating wirelessly

Safety information

Intended use

This device has been developed as a remote control for swimming pool

accessories. The LinkTouch

should be used only for this purpose, as

described in this user guide.

Precautions for Setup

- The LinkTouch

can only be mounted indoor. Do not mount outdoors.

- The power adapter is designed for 100 - 240V, 50/60 Hz. Verify if the

power outlet voltage is within this range before plugging in your power

adapter.

- Install the device close to an accessible power outlet. Make sure the

power/USB cable can be easily disconnected from the power outlet at

all times.

- Protect the power/USB cable and the power adapter from being strained

pinched or bucked.

- Place the power/USB cable out of walk ways to prevent tripping over

the cable.

- Use only the power adapter provided with the LinkTouch

incorrect power adapter may cause overheating or fire.

- Do not bend or place a heavy object on the power/USB cable as it could

damage the cable and result in risk of electric shock or fire.

- Do not use the power/USB cable if damaged or frayed.

- Be sure to hold only the connector end of the power/USB cable when

disconnecting. Repeated pulling on the cable will damage the cable.

Precautions for Operation

- Protect the LinkTouch

from moisture and do not operate if power/

USB cable or plug are defective.

- Never touch a power plug with wet hands.

- Do not place anything on top of the LinkTouch

- Never spill liquid of any kind on the LinkTouch

- Do not drop or hit the LinkTouch

. Use of an