Duratool D03214 Manuale - Pagina 4
Sfoglia online o scarica il pdf Manuale per Trapano Duratool D03214. Duratool D03214 8. 18v cordless hammer drill
Stampa la paginaADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES & CHARGERS
Batteries
•
Never attempt to open for any reason.
•
Do not store in locations where the temperature may exceed 40°C.
•
Charge only at ambient temperatures between 4°C and 40°C.
•
Charge only using the charger provided with the tool.
•
When disposing of batteries, follow the instructions given at the end of this manual.
•
Avoid short circuits. If connection is made between the positive (+) and negative (-)
terminal directly or via accidental contact with metallic objects, the battery is short
circuited and an intense current will flow causing heat generation which may lead
to casing rupture or fire.
•
Do not heat. If batteries are heated to above 100°C, sealing and insulating
separators and other polymer components may be damaged resulting in
electrolyte leakage and/or internal short circuiting leading to heat generation
causing rupture or file. Moreover do not dispose of the batteries in fire as an
explosion and/or intense burning may result.
•
Under extreme conditions, battery leakage may occur. When you notice liquid on
the battery, proceed as follows:
- Carefully wipe the liquid off using a cloth. Avoid skin contact.
- In case of skin or eye contact, immediately rinse with water. Neutralize with a
mild acid such as lemon juice or vinegar.
- In case of eye contact, rinse abundantly with clean water for at least 10 minutes.
Consult a physician.
•
Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do not
incinerate the battery.
Chargers
•
Check the mains voltage matches the rating label on the charger.
•
Use the charger provided with the tool only to charge the battery.
•
Never attempt to charge non-rechargeable batteries.
•
Have defective cords replaced immediately.
•
Do not expose to water, do not open the charger casing.
•
The charger is intended for indoor use only.
Risk of injury
•
Do not rivet or screw any nameplates or signs onto the power tool. The protective
insulation can thereby be rendered ineffective. Adhesive labels are recommended.
•
Only use an undamaged plug and cable. Do not work any materials that produce
any particles that are detrimental to health (e.g. asbestos).
Damage to property/material
•
Only use the original accessories.
Personal protective equipment
•
When using this power tool wear the following protective items:
- Protective glasses, ear protection, breathing mask.
4