DAPAudio CLUBMATE III Manuale - Pagina 11

Sfoglia online o scarica il pdf Manuale per Sistema di altoparlanti DAPAudio CLUBMATE III. DAPAudio CLUBMATE III 13.

Clubmate III™

Connection Cables

Take care of your cables, always holding them by the connectors and avoiding knots and twists when

coiling them: This gives the advantage of increasing their life and reliability. Periodically check your

cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely

by using unsuitable or faulty cables.

Unbalanced

For these applications the unit provides 1/4" TRS and XLR connectors to easily interface with most

professional audio devices. Follow the configuration examples below for your particular connection.

The DAP Audio Clubmate III™ requires almost no maintenance. However, you should keep the unit clean.

Disconnect the mains power supply and then wipe the cover with a damp cloth. Do not immerse in

liquid. Do not use alcohol or solvents.

Keep connections clean. Disconnect electric power and then wipe the connections with a damp cloth.

Make sure connections are thoroughly dry before linking equipment or supplying electric power.

Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the

fuse burns out, the product will not function whatsoever. If this happens,

so.

Unplug the unit from electric power source.

Insert a flat-head screwdriver into a slot in the fuse cover. Gently pry up the fuse cover. The fuse will

come out.

Remove the broken fuse. If brown or unclear, it is burned out.

Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover. Be sure to

use a fuse of the same type and specification . See the product specification for details.

Ordercode: D3265

follow the directions below to do

Balanced