DAPAudio entertainer mobile set basic Manuale del prodotto - Pagina 8

Sfoglia online o scarica il pdf Manuale del prodotto per Sistema di altoparlanti DAPAudio entertainer mobile set basic. DAPAudio entertainer mobile set basic 16. 2x150 watt 8 omh

Stampa la pagina

Mixer channels

Master section

10. 7-Band equalizer

All 7 frequency bands (60Hz, 160Hz, 400Hz, 1KHz, 2,5KHz, 6KHz, 16 KHz) provide a ±12dB

amplification/attenuation. You can change the overall sound, thus meeting your requirements for

different locations. If you want your sound to have more bass, you have to boost the low frequency

range, using the 60Hz or the 160Hz controls. If you experience too much bass, lower the levels of the

60Hz and 160HZ controls. If the mid-range sounds a bit nasal, try attenuating the 1KHz, 2,5KHz and

6Khz controls by some decibels. If you want to have a clear and highly intelligible sound, you should

increase the level setting of the 6kHz or 16kHz band a bit. When using the equalizer, less attenuation is

better than a great change of the control settings.

11. EQ On/Off switch

You can press the EQ button to bypass the equalizer.

1 / 2 / 3. Equalizer section (HIGH / MID / LOW)

The mixer's equalizer section allows shaping of the incoming audio signal. Turning

the equalizer controls to the right amplifies the frequency range, turning to the left

attenuates the signal. Minor changes to the equalizer controls usually produce the

best results. Try to avoid excessive enhancement of the mid band.

4. Eff/Aux control

This control lets you route the corresponding input signal to the integrated digital

effect unit at variable levels. In this way assigning special effects to musical

instruments or vocals is fairly simple. When making an effect-mix, it's advisable to

start with all FX- controls set to their center position. You can further increase or

reduce the effect's intensity, depending on your personal preferences.

5. Pan control

By using the panorama control you can change the input signal's position within

the stereo image. When the panorama control is set to center position, the audio

signal is equal for both the left and right output.

6. Peak/signal LED

Lights green if an audio signal is present, lights red if the channel clips.

7. Level control

Adjust the volume level of each channel. Rotating the control clockwise increases

the volume of each channel, counterclockwise decreases the output volume.

You can adjust this volume control knob after the main volume has been set up.

8. EFF/aux return control

Controls the volume level for the Aux return (33) input.

Note: If the Main stereo/monitor switch (12) is set in main monitor position, the aux

signal will be routed to the Main output only and will not be routed to the monitor

output.

9. MP-3 level control

Controls the level of the USB- MP3 player.

Note: If the Main stereo/monitor switch (12) is set in main monitor position, the MP3

signal will be routed to the Main output only and will not be routed to the monitor

output.