DURAVAC EU VH0423 SUB Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Aspirapolvere DURAVAC EU VH0423 SUB. DURAVAC EU VH0423 SUB 12. Wet & dry vacuum cleaner

NOTHING IS TOUGHER

PRELIMINARY OPERATIONS

• Connect the vacuum cleaner's power supply cable plug to a suitable socket;

• Connect the pump's plug D to the outlet C situated on the head of the vacuum

cleaner;

• Connect the water drainpipe from the drum to ﬁtting 1;

• Connect the suction accessories to the inlet of the tank F.

• When all the parts are assembled as Indicated above, start the vacuum motors by

pressing switches. Vacuum the liquids using the accessories supplied.

• During tank F ﬁlling the Float rises;

• When it reaches the trigger level, it activates the pump to empty the tank;

• When the tank is emptied, the ﬂoat goes down again to the bottom level and the

pump stops automatically;

• The pump's trigger level (pre-set on assembly) can be changed from the cable length

of the ﬂoat that comes out from cable retainer T.

• So as not to damage the emptying pump when vacuuming solids, it is required to

remove it before starting any work;

• To remove the pump, loosen the ring nut of ﬁtting 5 situated on the pump and

remove plug D after removing ring nut Y

• Extract the pump from tank F, then assemble cap Z instead of ring nut Y;

• For dry suction it is required to insert ﬁlter K into the drum. This, as well as the cap,

is not a standard supply. If your vacuum is equipped with paper bag L, slide paper bag over

the deﬂector.

EU VH0423 SUB