DURAVAC LA VE0210 Manuale d'uso - Pagina 15

Sfoglia online o scarica il pdf Manuale d'uso per Pulitore a ultrasuoni per gioielli DURAVAC LA VE0210. DURAVAC LA VE0210 20.

Stampa la pagina
NOTHING IS TOUGHER
LIQUID SUCTION
•
Remove the cloth filter B from the tank E (pic.19)
•
For models with internal holding tank. insert the tank provided with water valve O (pic. 20)
•
for models with external holding tank, apply the float cage equipped with the float under
the motorhead (fig.40)
•
Assemble suction head C onto the tank by inserting feeler Y in the suitable opening of tank O
and clasp the hooks (pic21)
•
Insert hose G in the suction inlet f (pic.4)
•
Insert at the other hose end handle P and extension tubes (M – O – O1) (pic 5)
•
Insert at the end of extension tube the wet tool S1 or the carpet tool O and apply the liquid
front device R (pics. 22-23) to intake liquids from floors.
•
Start suction by pushing the red push button A, after correctly plugging in the device (pic.7)
•
Adjust the speed of the motor by turning the potentiometer L (il foreseen) (pic 8)
WASHING WITH INJECTION-EXTRACTION SYSTEM
•
Remove cloth filter B from the tank E (pic.19)
•
Pour water, into the external tank D1 (pic26) or into the tank with liquid valve D (pic 27) and
for the models with internal tank, place into the tank E (pic 20)
•
Assemble suction head C on the tank by inserting feeler Y in the suitable opening of tank D
and clasp the hooks (pic 28).
•
For models with external holding tank join the connector X to the attachment placed on the
motorhead - INTAKE- (pic 29)
•
Insert hose G in the suction inlet F (pic. 4)
•
Insert at the hose end handle P and extension tubes (M-O-O1) (pic 5)
•
Insert at the end of extension tube the carpet tool Q if carpets or fitted carpets are to be
cleaned (pic 22), insert under carpet tool Q the front liquid device R if floors or hard surfaces
are to be cleaned. (pic. 23)
•
Link little hose K with the little hose H and N with the tap's front union (pics 30-32-33)
•
Insert the end of H at the connection located on head C - OUTTAKE. (pics 31-32-33)
•
Fasten hoses H-N with suitable clips (pic. 34)
•
Start pump with green switch A1- 1-minute ON /1 minute OFF - and motor with red switch A,
after correctly plugging in the device (pic. 7)
•
Adjust the speed of the motor by turning the potentiometer L (if foreseen) (pic. 8)
•
Push the tap's lever in order to let the accessory on the surface to be cleaned glide towards
you (pic. 35)
•
After the running, release the tap's lever and repeat the operation after lifting and removing
the accessory (pic36)
•
If you wish to clean tissues or armchairs, remove from, handle P the extension and remove
hose N from the tap. Insert the upholstery tool I, linking the hose with the tap's front union
(pic 37). In order to start washing, put the opening on the tissue, push the tap and pull it
towards you.
•
Example of use of opening I (pic 38)
ATTENTION: CLEAN REGULARLY THE FLOAT· Z· PLACED INSIDE THE PURIFYING BUCKET · D · (pic.39)
OR INSIDE THE FLOAT CAGE (pic.40) SO THAT IT CAN FREELY MOVE IN ITS HOUSING. REGULARLY
CHECK WHETHER THERE ARE ANY SIGNS OF DAMAGE.
15.
LA VE0210