Audiovox TRY32 Manuale d'uso e manuale d'installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso e manuale d'installazione per Ricevitore per auto Audiovox TRY32. Audiovox TRY32 20. Installation guide for all rear deck universal mounting 6"x9", 5"x7", 4"x10" speakers
Anche per Audiovox TRY32: Manuale d'installazione e d'uso (7 pagine)

Stampa la pagina

Audiovox TRY32 Manuale d'uso e manuale d'installazione

UNIVERSALINSTALLATIONANDIMPORTCARINSTALLATION

This installation is designed for cars, trucks, vans, and boats that have an existing radio opening that is

no larger than the size shown on the template provided (182mm wide x 53mm high). If the opening is

smaller than required, you can use a file to enlarge it to match the template, using the slots on the template

as a guide. If you have no existing radio opening, use the template to accurately cut the required size

as per the slots on the template.

CAUTION:

1.InspecttheExistingRadioOpening:

A. Use the radio opening template (supplied) to make sure the dashboard opening is the proper size.

If your vehicle does not have an existing opening of this size, it will be necessary to cut or file the

opening to these dimensions.

B. Check that there will be sufficient space behind the dashboard for the radio chassis.

2.PreparetheRadioforinstallation:

A. Carefully check the radio chassis for any shipping screws that are labeled "Remove Before

Installation" and remove them as necessary.

B. Remove the detachable front panel if it is attached to the chassis, as explained in the Operating

Instructions section of this manual.

C. Using the 2 removal tools (supplied), remove the mounting sleeve from the radio chassis as shown

in the diagram below.

3. MountingtheRadioSleeve:

A. Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large

enough, carefully cut or file as necessary until the sleeve easily slides into the opening. Do not

force the sleeve into the opening or cause it to bend or bow.

B. Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the

sleeve fully inserted in the dashboard opening, bend as many of the tabs outward as necessary

so that the sleeve is firmly secured to the dashboard.

MOUNTINGSLEEVE

MOUNTINGANGLELIMITATION

SIDEVIEW

3 3 3 3 3

O F

CHASSIS

1. DO NOT CUT OR FILE THE OPENING TO THE OUTER EDGES OF THE TEMPLATE!

2. FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE WITHIN 20°

OF HORIZONTAL. MAKE SURE THE UNIT IS MOUNTED WITHIN THIS LIMITATION.

20°

MAX.

FRONT

PANEL

20°

MAX.

USETEMPLATETOCHECKOPENINGSIZE

ORTOCUTOPENINGINSOLID

DASHBOARDS

RADIO

HELP!

1-800-645-7102

Monday-Friday

8:30am-7:00pmEastern

Saturday

9:00am-5:00pmEastern

REMOVALTOOLS

REMOVABLEFRONTPANEL

(REFERTOOPERATING

INSTRUCTIONSFORREMOVAL)