Contemporary Control Systems BASRTP-B Manuale di installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di installazione per Router wireless Contemporary Control Systems BASRTP-B. Contemporary Control Systems BASRTP-B 20.

Stampa la pagina

Introduction

The BASRTP-B is a multi-network router, sharing messages

among BACnet/IP, BACnet Ethernet and MS/TP networks. The

router is configurable via its internal webpage. The unit attaches

to a USB port of your computer and has one isolated MS/TP port

and one 10/100 Mbps Ethernet Auto-MDIX port.

The MS/TP port offers a 3-pin terminal block with a removable

plug for the EIA-485 connection. Through this port, up to 254

devices can be addressed — as many as 31 full-load devices on

the attached segment. All MS/TP baud rates (as stated in the

BACnet standard) are supported.

The Ethernet port offers a shielded RJ-45 connector. Through

auto-negotiation and Auto-MDIX, it automatically matches its

duplex setting, data rate and signal polarity to whatever is

needed by the attached equipment. Thus, only a straight-through

CAT5 cable is needed for hook-up.

The USB port is strictly used to power the BASRTP-B. No

communications is supported via the USB port.

The BASRTP-B features a user-accessible switch to reset the IP

address, subnet mask and gateway address to the factory defaults.

Three LEDs are present: A power LED glows green when proper

power is provided. The Ethernet LED glows green for 100 Mbps

operation and yellow for 10 Mbps and flashes to indicate activity.

A green LED flashes when MS/TP traffic is received.

Each unit complies with Class A radiated and conducted emissions

as defined by EN55022 and CFR 47, Part 15, and is intended for

use in non-residential areas.

TD070210-0ID