Contemporary Research ICC1-232 Specifiche tecniche - Pagina 2

Sfoglia online o scarica il pdf Specifiche tecniche per Controllore Contemporary Research ICC1-232. Contemporary Research ICC1-232 2. Rs-232 display controller, 1-way control
Anche per Contemporary Research ICC1-232: Manuale del prodotto (16 pagine), Manuale del prodotto (13 pagine)

Stampa la pagina
Contemporary Research ICC1-232 Specifiche tecniche
crwww.com
ICC1-232
ICC1-IR
Warranty
All CR products feature a full
two-year warranty.
HDTV Digital Signage System
iC-Net Display Controllers

Specifications

Feature
Type
RS-232 Display Controller
Control Options
RS-232 commands
Power, Channels, Inputs
Control Lockout (if available)
Control Database
Onboard commands for most display makes and models, network selectable
Physical
5.5" W x 1.1" H x 3.4" D, 8 oz
Tuning
NTSC and HDTV channels
RF Tap
Internal tap - Less than -1.5 dbmV loss
Front Panel
RF In: 'F', female, 75 ohm
RF Out: 'F', female, 75 ohm
Net: Green LED for iC-Net bus and DC power, flashes once per second if active
RS-232: DB-9 male connector, baud rates from 1200 to 115.2K baud
Tx: Red LED lights when RS-232 information is sent
Rx: Yellow LED lights when RS-232 information is received
Power In: 2.1mm coaxial jack (inside center conductor positive), 75 mA maximum
11.5 to 16.5 VDC, 12 VDC typical (may be unregulated)
DIP Switches: Located on base, sets IR code operation and device number
Includes
RS-232 cable optional
Mounting Kit
RF Loop Cable
12 VDC Power Supply, 100 Ma
Options
CC-232 RS-232 Control Cable (Specfic make, model, and length)
Feature
Type
IR Display Controller
Control Options
Discrete IR control
Power, Channels, Inputs
Control Database
Onboard commands for most display makes and models, netwokr selectable
Physical
5.5" W x 1.1" H x 3.4" D, 8 oz
Tuning
NTSC and HDTV channels
RF Tap
Internal tap - Less than -1.5 dbmV loss
Front Panel
RF In: 'F', female, 75 ohm
RF Out: 'F', female, 75 ohm
Net: Green LED for iC-Net bus and DC power, flashes once per second if active
IR Out: 3.5mm jack for CC-IRE IR Emitter cable or compatible CC-IRS serial cable
Supports carrier frequencies up to 62 KHz
IR Out: Red LED lights when sending IR commands
Power Sensor: 3.5mm jack for included CC-HSD scan sensor or 5V logic-level input
Power Sensor: Red LED lights when sensor indicates power on
Power In: 2.1mm coaxial jack (inside center conductor positive), 75 mA maximum
11.5 to 16.5 VDC, 12 VDC typical (may be unregulated)
DIP Switches: Located on base, sets RS-232 code operation and device number
Includes
IR Emitter
Mounting hardware
RF Loop Cable
CC-IRE IR Emitter
CC-HSD Scan Sensor
12 VDC Power Supply, 100 Ma
Options
CC-IRS IR Serial Cable
Contemporary Research • 17630 Davenport Rd., Suite 113 • Dallas, TX 75252
Phone: 972-931-2728 • Toll Free: 888-972-2728 • Fax: 972-931-2765
iC-Net Display Controllers NDS 0306 ©2006, specifications subject to change without notice
ICC1-232
ICC1-IR