Audiovox CDC-10R Manuale d'uso - Pagina 2
Sfoglia online o scarica il pdf Manuale d'uso per Lettore CD Audiovox CDC-10R. Audiovox CDC-10R 8. Cd changer controller / fm modulator special performance series
Anche per Audiovox CDC-10R: Manuale d'uso (13 pagine), Manuale d'uso (8 pagine), Manuale d'uso (8 pagine), Manuale d'uso (8 pagine)

OPERATING INSTRUCTIONS
The CDI-100R CD Changer Controller / FM Modulator is designed to
permit operation of compatible SPS/Audiovox CD changers through
the FM section of any car stereo system. Please check with your
SPS/Audiovox car stereo specialist for recommendations of the CD
changer models that will work with the CDI-100R. The specific
details on the handling of discs and the use of the CD magazine
(loading, removal, etc.) will be found within the Owner's Manual of
the compatible changer.
Since the CDI-100R/CD changer system will operate through the
FM stereo section of your existing sound system, adjustment of the
audio functions (volume, tone, balance etc.) is made by using the
controls on the car stereo. Control of disc play is by the CDI-100R,
as well as by the optional CDC-10R wireless remote control. The
output from the CDI-100R is at 88.7 or 89.1 MHz. (set by the
installer) on the FM band. To simplify operation of the system, it is
recommended that a pre-set memory pushbutton on the radio be set
to the selected output frequency of the modulator. Consult the
operating instructions of the car stereo for directions on setting the
memory pushbuttons.
SETTING UP FOR OPERATION
Following the instructions in the owner's manual of the compatible
CD changer, load the desired number of discs into the CD magazine
and insert the magazine into the changer.
Turn on the car stereo and select FM band operation. Tune the radio
to either 88.7 or 89.1 MHz. (depending on the frequency to which the
installer has set the unit) or push the pre-set memory pushbutton
that has been set as per the above description.
Turn on the changer system by pressing the Play/Pause button
on the commander. The display panel on the commander will
illuminate and play of the first disc in the magazine will begin. Adjust
the volume, tone, and balance to your taste by using the controls on
the car stereo.
When the last track on a disc has played, the unit will automatically
advance to and begin play of the next disc in the magazine. When
the last track on the last disc in the magazine has been played, the
unit will automatically return to the first disc and begin play again.
-1-
2