Contemporary Research QMOD-HDMI RGB Manuale di installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione per Amplificatore Contemporary Research QMOD-HDMI RGB. Contemporary Research QMOD-HDMI RGB 11. Hd modulator-iptv encoders
Anche per Contemporary Research QMOD-HDMI RGB: Manuale del prodotto (17 pagine), Manuale del prodotto (16 pagine)

Stampa la pagina
TV Integration
Setup
•
Connect the RF coax feed to RF In.
•
ICC1-IRX
o
Connect IR Emitter cable to IR Out
o
If the TV does not have discrete power on/off commands, there is an optional USB sensor cable that connects from the
CSM1 sensor input to the TV's USB port. If arranged for at the time of order, the controllers will be set up to use power
sensing.
•
ICC1-232
o
Connect included RS-232 cable to the TV's control input. Depending on the TV, this will be a DB9 connector or a 3.5mm jack.
•
Connect the included short RF cable from the ICC1 RF Out to the TV's RF input.
•
Connect the 500 mA DC power supply to the ICC1 power input.
•
Mount to the TV using the supplied Velcro strips.
Testing
The following assumes the system is powered On and connected to RF distribution.
•
At this point, the NET light on the TV controller will blink once per second. If the LED stays on, it is not receiving the "heartbeat"
signal from the ICE-HE DXL. Check connections at the RF head end.
•
Turn the TV on and scan for digital cable channels – all 8 channels should be present.
Page 5