Addonics Technologies Zebra ZUSCSU Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Involucro Addonics Technologies Zebra ZUSCSU. Addonics Technologies Zebra ZUSCSU 12. External usb 2.0 enclosure

Stampa la pagina

Create multiple partitions

1. If you pressed N, then you're going to create multiple partitions. To

do this, you'll need to set the size of the new partition. This is done

by entering a value next to "Enter partition size in Mbytes or percent

of disk space to create a Primary DOS Partition."

For example, if your new hard drive is 20GB and you'd like to create

two 10GB drives, entering 50% will do just fine. To enter a number in

Mbytes, take the total number in Mbytes and divide it in half to get

the correct number to input. To make things easier, just use a

percentage of the total hard drive and let your computer do the math

for you.

2. When you've finished entering the size of the new partition, hit Enter

to create it.

3. Press Esc to return to the new drives main menu.

4. From here, select 1 to "Create DOS Partition or Logical DOS Drive."

5. Now it's time to create the extended partition. To do this, select 2

from the menu and hit Enter.

6. A screen that says, "Enter partition size in Mbytes or percent of disk

space to create an Extended DOS Partition" will appear. You should

notice that the computer did the math for you and filled in the

remaining hard drive space to be partitioned. If this number is OK,

press Enter to complete the process. If it's not, and you plan on

creating additional partitions, lower the number accordingly and then

press Enter.

7. After fdisk creates the partition, press Esc to return to the new hard

drive's main menu.

8. Before the new extended partition will work, it needs to have a

Logical DOS Drive created on it. To do this, select 1 on the list to

"Create DOS Partition or Logical DOS Drive."

9. Select 3 from the list to "Create Logical DOS Drive(s) in the

Extended DOS Partition" and hit Enter.

10. Your computer will then verify drive integrity and automatically

deliver the size of the extended drive. You should see a number next

to "Enter logical drive size in Mbytes or percentage of drive." This

number should equal the size of the extended drive you created

earlier.

11. Press Enter to "Create Logical DOS Drive(s) in the Extended DOS

Partition."

12. After hitting Enter, you'll see a new letter assigned to the new

partition you just created.

13. Press Esc to exit this screen and return to main menu.

Addonics Technologies