Addonics Technologies ZESAES256 Manuale d'uso - Pagina 2
Sfoglia online o scarica il pdf Manuale d'uso per Involucro Addonics Technologies ZESAES256. Addonics Technologies ZESAES256 4. Cipher z-drive enclosure
Stampa la paginaFront
Removing the front panel:
You can remove the front panel of the enclosure to access the drive drawer of the SATA
drive.
Hard drive installation:
1. Loosen the two screws from the rear
panel. Pull out the interior tray from the
enclosure.
2. Connect the 15-pin SATA power cable
to the power connector of the hard drive.
Also connect the 7-pin SATA data cable to
SATA port of the hard drive.
3. Use the enclosed screws to secure the
hard drive to the tray.
4. After the hard drive is installed, slide the
tray back into the enclosure and then
fasten the two screws properly.
www.addonics.com
4-pin Floppy
Power Connection
Cipher Key
Technical Support (M-F 8:30am - 6:00pm PST)
Removable
Cover
Power and Drive
Activity LED
Connect to
SATA Drive
Connect to eSATA Host
Phone: 408-453-6212
Secure
Drive
Here
Screws
Email: www.addonics.com/support/query/