Addonics Technologies HDUS1125LT Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Hardware del computer Addonics Technologies HDUS1125LT. Addonics Technologies HDUS1125LT 18. 1:11 2.5” hdd duplicator lt

Stampa la pagina

Connecting the Power Cable and Powering On

Connect the power cord provided from the wall outlet to the back of the tower.

Push the power button to turn on the HDD duplicator.

II.

The Duplicator Panel

There are four buttons and an LCD on the panel of HDD Duplicator.

1 – LCD shows a function or a message.

2 – it is used to scroll up function menus.

3 – it is used to scroll down function menus.

4 – it is used to execute a function.

5 – it is used to cancel a function.

III.

Duplicating a drive

When the duplicator powers on, it initializes and goes through the steps below

Shows the firmware version

HD Duplicator

1-1 Ver:

Detect Drives' status.

Detect Drives

Copy HDD copies data directly from the source hard disk to the target hard disk.

Press ENT button to begin copy. The system will auto-detect the hard disks and show the following info

on the LCD.

Copy-36MBs 0%

235.7GB

1:48

The LCD will show the following info during the copying process: remaining time, completed percentage.

The copy speed, capacity and time will vary depending on the source hard disk. Once the copying

process is complete the LCD will display the following results.

Copy HD

OK:

www.addonics.com

Duplicator Panel

Initialize SDRAM's status..

Initialize SDRAM

Shows the first function:

1.Copy HD

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/

ENT

ESC