DURAVIT 4053424187884 Istruzioni per il montaggio - Pagina 5
Sfoglia online o scarica il pdf Istruzioni per il montaggio per Prodotto idraulico DURAVIT 4053424187884. DURAVIT 4053424187884 12. Slim shower toilet unit
Important information
Mounting instructions information
These mounting instructions come as part of the Duravit
shower toilet and should be read carefully prior to in-
stallation.
Explanation of the key words and symbols
Indicates a hazardous situation which,
DANGER
if not avoided, will result in death or
serious injury.
Is used to address practices not
NOTICE
related to physical injury
Link to the mounting information in this section
Target readership and qualifications
The shower toilet and associated water connection should
only be installed by qualified plumbers. The electrical
installation should only be carried out by qualified
electricians.
Risk of product and/or property
NOTICE
damage!
> Observe the local installation regulations and any
country-specific standards at all times.
Risk of product damage due to
NOTICE
freezing water!
> Do not install the shower toilet in rooms at risk of
frost. The room temperature must not be less than 4
°C.
Risk of product damage due to
NOTICE
condensation!
> Leave the unit switched off for a few hours if it has
previously been moved from a cold location to a warm
location.
SensoWash Slim_MAL_CN_57003/18.01.3
Safety instructions
DANGER
Risk of fatal electric shock!
> Do NOT remove individual shower toilet components.
> If the supply cord on this unit is damaged, it must be
replaced by the manufacturer, the service agent or
similarly qualified persons in order to avoid a hazard.
> Appliances have to be correctly earthed.
Mounting instructions
Please read pre-installation information sheets prior to
the installation. These are available to download on the
Internet at www.duravit.cn.
An installation video of the complete shower toilet is
available at
www.duravit.cn/mnt_sewa_slim.
Simply use
this QR code
1
Checking the installation requirements (Diagram 1)
The installation of the WC ceramics with pre-instal-
lation of the shower toilet water and power supplies
is described in separate instructions.
> Ensure that the supplies and WC ceramics have
been installed and mounted according to the in-
structions and regulations.
19
Positioning the metal bracket
(Diagram 19)
> Continue with step 22 for screw mounting.
> Follow the instructions up to step 21 for
mounting with adhesive and then continue with
step 26.
5