Addonics Technologies SRDAP46SL Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Sistema array di dischi Addonics Technologies SRDAP46SL. Addonics Technologies SRDAP46SL 6.

Stampa la pagina
Installing Bridge Boards on Mounting Poles Inside
the Storage Rack
Separate PM or HPM from bracket by unscrewing 4 screws on the PCB. Install
the PM or HPM onto the desired mounting pole.
Installing Bridge Boards onto Back Panel
Remove punch outs from the rear panel of the Storage Rack. Using the included
screws, attach bridge board onto the desired back panel mounting location.
Connect storage devices onto the internally mounted PM or HPM, then connect
the host connection onto the rear mounted bridge board.
SATA Device
PM/HPM
9
www.addonics.com
Bridge Board
Technical Support (M-F 8:30am - 6:00pm PST)
Top Cover Screws
How to Remove the Top Cover:
1.
Locate the 2 screws at the back of the
storage rack
2.
Turn screws counterclockwise to
loosen.
3.
Lift the top cover and pull towards the
rear end of the rack.
To Mount Back the Top Cover:
1.
Align the top cover with the edges of
the rack.
2.
Lay it flat on the rack and slide it
towards the front of the rack.
3.
Turn screws clockwise to tighten.
How to Remove the 5 ¼" Drive
Cage:
1.
Locate the 4 screws on the drive cage.
2.
Turn screws counterclockwise to
loosen.
3.
Lift the chassis up.
Phone: 408-453-6212
Email: www.addonics.com/support/query/
2