Apogee AD-16 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Convertitore multimediale Apogee AD-16. Apogee AD-16 17. 24-bit 16-channel a/d converter
Anche per Apogee AD-16: Scheda tecnica (1 pagine)

Apogee AD-16 Manuale d'uso
CAUTION: To reduce the risk of electrical shock, do not remove the cover. No user serviceable parts inside;
refer servicing to qualified personnel. To change the operating voltage or change the firmware EPROM, it is
necessary to remove the cover of the unit. As a result, such operations must be carried out only by technically-
qualified personnel.
WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside
the enclosure—voltage that may be sufficient to constitute a risk of shock. Operations indicated with
this symbol should be carried out only by technically-qualified personnel.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in
the accompanying literature. Read the manual.
Environmental warnings
Never touch the AC plug with wet hands.
Do not use this unit in damp areas or near water.
Avoid damaging the AC plug or cord and potentially causing a shock hazard.
If liquids spill into or onto the DA-16, disconnect the power and return to your dealer for servicing.
This unit should only be connected to an AC power supply of the correct voltage. Check with your dealer
if in doubt.
Precautions should be taken so that the grounding or polarization of the AC power is not defeated.
Unplug the AC cord when the unit is unused for long periods of time.
This unit should only be cleaned as recommended by the manufacturer, or damage to the finish may result.
To avoid potential damage to your unit, only use in areas where proper ventilation and moderate tempera-
tures are assured.
Power warning
AC voltage ratings for electrical power vary from area to area. Severe damage to your unit is possible
if your DA-16 is configured incorrectly for your local power. If in doubt, consult an Apogee dealer. A
label adjacent to the power connector indicates the voltage to which the unit was set on leaving the
factory.
Instructions for changing the power input voltage are provided. We strongly advise you to check that
the voltage label remains current and is updated if the input voltage setting is changed.

FCC warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manu-
al, may cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference, in which case the user will be required to take whatever measures may
be required to correct the interference at his own expense.
Copyright Notice
The Apogee DA-16 is a computer-based device, and as such contains and uses software in ROMs. This soft-
ware, and all related documentation, including this Owner's Manual, contain proprietary information which is
protected by copyright laws. All rights are reserved. No part of the software and its related documentation may
be copied, transferred, or modified. You may not modify, adapt, translate, lease, distribute, resell for profit or
create derivative works based on the software and its related documentation or any part thereof without prior
written consent from Apogee Electronics Corporation, U.S.A.
Apogee AD-16 User's Guide

Warnings

Page 4