Apogee Symphony I/O Mk II SoundGrid Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di registrazione Apogee Symphony I/O Mk II SoundGrid. Apogee Symphony I/O Mk II SoundGrid 20. For units equipped with the wsg option card
Stampa la pagina
Automatic Configuration
If this is your first time setting up your system, use the Automatic Configuration Wizard to make the settings for
you. To do this:
1. Select the Setup tab at the top of the screen.
2. Make sure System Inventory is selected on the left column.
3. Click the START button under Auto Config and the Wizard will open.
4. Follow the steps provided in the Wizard.
This Wizard will scan the SoundGrid network, identify and connect
any hardware, and even patch IO routings to the system
Automatically.
For more information on the Automatic Configuration Wizard, see
page 14 of the SoundGrid Studio Manual.
https://www.waves.com/downloads/manuals
Note: Routing of signal for inputs/outputs is done in the Patch tab:
● To modify routing when no Waves DSP Server is connected, click Patch, then click Device to Device to
open the Device to Device routing grid.
● To modify routing when a Waves DSP Server is connected, click Patch, then click the eMotion Input A,
Input B and Output buttons to route Mixer inputs and outputs.
See the SoundGrid Studio Manual for a full description of the features of the Patch tab screen.
https://www.waves.com/downloads/manuals
APOGEE SYMPHONY I/O MK II SOUNDGRID USER'S GUIDE
Page 9