Apollo Xpander XPA-CB-14004-APO Manuale di messa in servizio - Pagina 10
Sfoglia online o scarica il pdf Manuale di messa in servizio per Sensori di sicurezza Apollo Xpander XPA-CB-14004-APO. Apollo Xpander XPA-CB-14004-APO 14. Diversity loop interface module
Anche per Apollo Xpander XPA-CB-14004-APO: Manuale di messa in servizio (19 pagine)
Stampa la pagina
Menu Level (2.0)
Device Status
From this menu new or additional devices can be logged on to the interface. Up to 31 devices can
be logged on to each interface.
Add New Device
Remove Device
Interface Status
Radio Channels
Menu Level (3.0)
Device Status
This menu shows a list of devices logged on to the interface. To remove a device use the rotary
control to select it and press to confirm. Make sure this has been done before physically removing
Add New Device
the device.
Remove Device
Interface Status
Caution: Once devices have been removed they will no longer be able to signal an alarm. If a
device is permanently removed it will also need to be removed from the control panel.
Radio Channels
Menu Level (4.0)
Device Status
From this menu the status of the loop interface and background noise can be viewed.
Add New Device
Remove Device
Interface Status
Radio Channels
Menu Level (4.1)
Fault Status
This menu shows detailed information on the fault status of the interface. If multiple faults are
present they can be individually viewed by using the rotary control.
Background Level
Fast Test
Ident
For a full range of analogue values please refer to Appendix B, page 11.
Menu Level (4.2)
Fault Status
The background noise level on the two signalling channels can be viewed.
Background Level
Fast Test
Ident
Ch 1 = Channel 1
Ch 2 = Channel 2
CH1
PP2286/2019/Issue 13
0 - 24
= Very low
25 - 49 = Low
50 - 74 = Medium
75 - 99 = High
100
= Very high
XXX
Page 9 of 12