DURAVIT LM 7865 Istruzioni per il montaggio - Pagina 3
Sfoglia online o scarica il pdf Istruzioni per il montaggio per Prodotti per la cura della persona DURAVIT LM 7865. DURAVIT LM 7865 7. Light and mirror
Stampa la pagina
Important information
Intended use
The mounting instructions come included with the Duravit
product and are aimed at people who carry out out the
electrical installation for the product. You must read through
the mounting instructions carefully and they must be available
at all times.
Target readership and quialifications
The electrical installation may only be carried out by qualified
electricians.
Furniture complies with applicable requirements of the
referenced standard(s):
Safety Household and Commercial Furnishings.
( UL962, 3rd ed. portable Luminaires CSA C22.2 No. 12 )
Icons and symbols
Symbol
Meaning
This symbol highlights useful and important
information.
>
Action required
Instructions for use
• The bathroom furniture range complies with the standards
and guidelines applicable at the time of delivery and is
designed for use in bathrooms.
• Direct contact with water should be avoided, for example,
when showering.
• Mirrors / Mirror cabinets require a GFCI 110V 60Hz power
source.
• Flat plug will be supplied with mirror / mirror cabinet.
3
Lights and Mirror_LM7865/16.12.1
Safety instructions
Danger to life
Contact with electricity may lead to an electric shock.
> Carry out the electrical installation in accordance with
the national and international directives and standards.
> Connect the electrics using a ground fault circuit
interrupter (GFCI) in wet rooms or other specially equipped
rooms.
> Disconnect electrical components from the power supply
before the installation.
> Prevent the power supply from being switched on
accidentally.
Penetration of foreign bodies and water
Foreign bodies or water in equipment lead to a short circuit
that may cause damage to the product.
Measuring mode
The control unit has a measuring mode. Once the measuring
mode is active, the light is switched on again automatically
90 seconds after it has been switched off.
The measuring mode may be triggered during an
installation under voltage by accidentally actuating
the touch LED/infrared switch continuously
> Actuate the touch LED/infraced switch for longer than
65 seconds to activate the measuring mode. Use a
relective object (paper) for the infrared switch.
The light flashes 6 times.
> Actuate the touch LED/infraced switch again for more
than 65 seconds to deactivate the measuring mode.
Use a reflective object (paper) for the infraced switch.
The light flashes 4 times.