Appalachian Stove & Fabricators XLB Manuale d'installazione e d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Stufa Appalachian Stove & Fabricators XLB. Appalachian Stove & Fabricators XLB 19. Zero-clearance

Stampa la pagina

3. ATTACHING THE FREESTANDING KIT

Tool needed: Drill

(A) Remove the wooden blocks from the bottom of the

stove.

(B) Position the pedestal on the bottom of the stove so that

it is centered from the sides, sits inside the angle, and is

even with the angle at the front of the stove. The "turned

in" flanges on the pedestal should be placed against the

bottom of the stove. (NOTE: The vent opening on the

bottom of the stove should be completely inside the

pedestal.)

FIGURE 8A

Drill into the holes after the pedestal is positioned correctly.

The screws will make their own hole in the stove bottom.

4. IMPORTANCE OF PROPER DRAFT

Draft is the force that moves air from the appliance up

through the chimney. The amount of draft in your chimney

depends on the length of the chimney, local geography,

nearby obstructions, and other factors. Too much draft may

lead to excessive temperatures in the appliance and may

damage the catalytic combustors. Inadequate draft may

cause backpuffing into the room and "plugging" of the

chimney catalyst.

NOTE: Inadequate draft will cause the appliance to leak

smoke into the room through the appliance and chimney

connector joints.

NOTE: An uncontrollable burn or a glowing red stove part

or chimney connector indicates excessive draft.

FIGURE 8B

5. MOUNTING THE STOVE PIPE

(A) Pipe may be 6" or 8" insulated class A.

(B) Slide and secure the pipe onto drip-proof connector

mounted in the Gemini XLB unit.

unit with heat resistant insulation.

FIGURE 9

MOUNTING THE STOVE PIPE