Durite 0-441-05 Manuale rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale rapido per Apparecchiature di illuminazione Durite 0-441-05. Durite 0-441-05 2. Led high intensity warning light

Stampa la pagina

LED High Intensity Warning Light

Part 0-441-05

1. Switch Patterns:

(Yellow wires touch Red wires)

To change to next flash pattern:

With the LED Light Heads switched on, momentarily apply + VDC to YELLOW wires for less than 1 sec-

ond and release

To reset:

With the LED Light Heads switched on, quickly apply three times + VDC to YELLOW wires and release.

LED Light Head will reset to the factory default pattern (Pattern # 0, Random)

2. Synchronization: (More than 2 sets of LED Light Heads - 8 Light Heads Maximum!)

First, connect YELLOW wires of all heads together, quickly apply three times + VDC to YELLOW wires

and release for Pattern # 0, Random.

Secondly, momentarily apply + VDC to YELLOW wires to for less than 1 second and release for Pattern

# 1, then the synchronization will be functioned.

3. Alternating or Simultaneous Flash: (More than 2 sets of LED Light Heads)

Under Synchronization, connect WHITE wire of LED Light Head 1 to Red wires of all other LED Light

Heads;

LED Light Head 1 will alternate with other LED Light Heads.

If the WHITE wire not connected to Red wires, all LED Light Heads will flash together (Simultaneous

flash)

4. Flash Patterns: 20 selectable strobe patterns

SPECIFICATION

Type

Ultra high intensity LED

Red

Colour

Number of LEDs

6 x 3 watt

Voltage

12/24 volt dc

Current

0.70 amps at 12volts

Flash patterns

Base

Aluminium

Operating temperature

-20C - +50C

Protection

IP68

Weight

40g

Dimensions

l 113 x w 28.4 x h 9mm

Compliance

CE, ECE R65 Class 1, SAE Class 1

WWW.DURITE.CO.UK

FLASH PATTERNS