Data Harvest Smart Wireless 1110 Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Accessories Data Harvest Smart Wireless 1110. Data Harvest Smart Wireless 1110 16. Ph sensor



Coatings on the glass or junction surfaces e.g. proteins, will prevent proper operation (see

maintenance on page 9). Avoid frequent or prolonged periods of use in these solutions.

To set the range

The stored calibration for the sensor is the pH range, which is suitable for most experiments. It is also

possible for the user to adjust the calibration constants of an electrode – this will be stored in the

connected Adaptor as the User pH range, see page 8.

To alter the range in the EasySense2 software:

Either select the Devices icon

and select the edit symbol.

The range setting will be retained until changed by the user.

This range is the pre-set default calibration that is suitable for most investigations. The calibration is

set for operation at a temperature of 25˚C.

±1000 mV

This range gives the reading in mV and can be used in experiments on calibrating a pH sensor using

buffer solutions of known pH values. See page 14.

An ideal would be that the potential is zero mV when the pH is 7 but in a real pH system this is rarely

so, it is normally between -20 mV and +20 mV.

This range can also be used with ion-selective electrodes (ISE) and oxidation reduction probe (ORP).

All ISE's work in the same manner as a pH electrode, in fact the pH electrode is really an H+ ISE. Ions

have either a positive charge or a negative charge. The ISE measures the electrical energy created by

the presence of the charged particles. An Ion Selective membrane controls the flow of the ions to the

electrode; it is this membrane that makes the electrode particular to an ionic species. The production

pH Adaptor & Electrode

or the Setup icon (bottom left of screen), line 1: Sensors

Tap or click the down arrow and select the

wanted range from the list

Edit symbol

Current range

highlighted