DURKOPP ADLER 867 Istruzioni aggiuntive - Pagina 11

Sfoglia online o scarica il pdf Istruzioni aggiuntive per Accessori per macchine da cucire DURKOPP ADLER 867. DURKOPP ADLER 867 20. Remaining thread monitor
Anche per DURKOPP ADLER 867: Manuale di istruzioni (16 pagine), Istruzioni (4 pagine), Manuale di istruzioni (16 pagine), Manuale di istruzioni (8 pagine), Istruzioni aggiuntive (18 pagine)

Assembling the remaining thread monitor

9. Roll up the remaining thread monitor cables that are too long and fix

Fig. 5: Connecting the remaining thread monitor on Classic machines (4)

(8) - Y-connection

(9) - Hoses

10. Assemble the valve (10).

11. Disassemble the valve unit.

12. Screw the valve (10) to the valve rail.

13. Assemble the valve unit.

14. Connect the hoses (9) of the remaining thread monitor to the valve.

15. Assemble hoses and cables with clips to the oil return line and to the

16. Connect the magnet valve electrically to the valve circuit board.

Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018

them to the base plate of the remaining thread monitor control with

cable ties.

⑩

Ensure that the sealing washer is in the correct position when doing this.

With right AND left remaining thread monitor: Connect hoses (9)

to Y-connection (8).

knee lever shaft.

• X22, PIN 1/7/8 (+) and PIN4 (FL)

• X22, PIN 1/7/8 (+) and PIN2 (FA)

⑨

⑧

(10) - Valve

X22