Addspace 033 7500 Series Istruzioni per il montaggio passo dopo passo - Pagina 6

Sfoglia online o scarica il pdf Istruzioni per il montaggio passo dopo passo per Arredamento per interni Addspace 033 7500 Series. Addspace 033 7500 Series 6.

Stampa la pagina

STEP 7

ATTACH FEET

LOCATE FEET TOWARDS

THE CORNERS FOR MORE

STABILITY. MARK POSITION

WITH BRADAWL FIRST.

THEN SCREW IN TO PLACE.

ENSURE YOU SECURE

THE FEET TO BOTTOM PANEL

THIS IS EDGED IN SILVER.

STEP 8

PULL SLIDING PART OF

DRAWER RUNNERS (ee)

OUT SO THEY ARE FULLY

EXTENDED. THEN PLACE

THE COMPLETED

DRAWER UNIT ON TO

THE RUNNERS SO THAT

THE 2ND SMALL HOLE

FROM THE FRONT

OF THE RUNNER LINES

UP WITH THE HOLE IN

THE SIDES OF THE DRAWER

SECTION. YOU MAY

REQUIRE SOME HELP TO

DO THIS. THEN FROM THE

INSIDE OF THE DRAWER

SCREW (gg) THROUGH SO

THEY ARE ATTACHED.

Fittings you will need in this step:

(x5)

(x10)

LIFT UNIT ONTO FEET( 2 PERSONS ) THEN

Fittings you will need in this step:

(x2)

CONGRATULATIONS YOUR UNIT IS COMPLETE

AFTERCARE INSTRUCTIONS, PLEASE READ.

PLEASE NOTE:TO KEEP YOUR UNIT IN PERFECT CONDITION CLEAN ONLY WITH A SOFT DAMP CLOTH.DO NOT USE

ANY ABRASIVE CHEMICAL CLEANERS. DO NOT SUBJECT YOUR UNIT TO HEAT OR MOISTURE. I E BY

PLACING HOT OR DAMP CUPS ETC ON ANY OF THE SURFACES.

WE RECOMMEND THAT THE UNIT IS LIFTED AND NOT DRAGGED.

LOCATE DRAWER

PAGE 6