Duro Dyne PLSU3 Teoria del funzionamento - Pagina 2

Sfoglia online o scarica il pdf Teoria del funzionamento per Cutter Duro Dyne PLSU3. Duro Dyne PLSU3 8.

Additionally, if no material is placed over the encoder and start is pressed, then the motor

INFINITELY

will run

until the stop button is pressed on the HMI's main screen.

HMI-Lock out screen

If either E-stop buttons or the interlock guard switch is broken, the HMI [5] screen will

default to a red lock-out screen as shown below in Pic.1. The operator cannot resume

operating the machine until the necessary safety measures are met.

Pic.1 E-stop screen

General Operation

Human Machine Interface

Upon initial start-up the operator will have the option of choosing which side of the

machine they would like the touch-screen HMI to be mounted (left or right). The touch-

screen HMI's power cable and network (ethernet) cable needs to be plugged in to their

respective ports as shown in Pic.2.

Pic.2 HMI plugs