Data Video TLM-702HD Manuale di istruzioni - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per Monitor Data Video TLM-702HD. Data Video TLM-702HD 12. 2 x 7" tft lcd monitor
Anche per Data Video TLM-702HD: Manuale di istruzioni (11 pagine)
Stampa la paginaCalibrating Datavideo Monitors
Perhaps the most important way to make sure that your video really looks as good as it can on
other monitors is to monitor the video during production with a properly calibrated monitor.
For guidance on how to calibrate a Datavideo Monitor using SMPTE colour bars please visit
our website
http://www.datavideo.info/specs/Datavideo_Calibrating_Monitors.pdf
Tally light indication
The TLM-702HD has a tally input connector on the rear of each panel. The Datavideo range of
digital video switchers can provide tally light signals to this connector. The Datavideo range of
intercom systems can also be used to pass on these tally signals.
Tally In
This D-sub 15pin Female connector can receive tally signals from
external equipment such as a Datavideo digital video switcher.
TALLY LIGHT
Red = Live, Amber = Standby.
By closing contacts between Pin 1 and 4 the LIVE or RED LED will be displayed.
When the external signal is high (5V) the LED turns Off.
When the external voltage signal is low the LED turns On.
By closing contacts between Pin 3 and 4 the STANDBY or AMBER LED will be displayed.
When the external signal is high (5V) the LED turns Off.
When the external voltage signal is low the LED turns On.
Pin 1:
Pin 3:
Pin 4, 10 :
Pin 2,5,6,7,8,9,11,13,14 : Not used
Pin 12,15:
Tally RED
LED On/Off
Tally Yellow LED On/Off
GND
Reserved – service only.
10