Duro-Med 1013 Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Aiuto alla mobilità Duro-Med 1013. Duro-Med 1013 8. Heavy duty steel rollator with loop lock brakes

WARNING!

before assembly and use of this rollator.

This rollator should always be assembled and fitted for the

user by a qualified DuroMed authorized dealer. Before using the

rollator, be sure your weight is within the weight capacity of the

unit. This rollator will require little or no assembly and can be

performed without tools.

PARTS OF ASSEMBLY:

2 Handlebars with Loop Lock Brakes; 1 Basket; 1 Tray.

ASSEMBLY INSTR UCTIONS:

1. With the rollator in the upright position,

open legs all the way by pushing the

front legs out. Rotate the folding lock

mechanism around to lock securely onto

cross bar to prevent the rollator from

folding while in use.

2. Remove the two rubber plugs from each

side of the steel frame. Place both

handlebars with their pre-assembled

locking loop brakes, into the handlebar

openings and adjust to the desired

height. To do this, twist the height

adjustment handle on the outside of

each frame opening until tight.

(CAUTION: DO NOT EXTEND THE

HANDLEBARS BEYOND THE SECURITY MARK.)

3. Test and adjust the tension on the

braking system mechanism to ensure

proper and secure braking before use.

4. Align tray with seat rest by placing

the four prongs on the tray into the holes

in the seat.

5. Hook wire basket onto hooks located

under the rest seat.

I T E M # 1 0 1 3

Overall Width 23"; Wheels, 8"x 2";

Seat, 15" x 8.5"; Seat Height, 24";

Basket, 16" x 12" x 7" deep; Tray 15.5" x 10" x 1" deep;

Handle Height, 31" - 38.5"; Width Between Handles, 17";

Weight, 28 lbs.; Weight Capacity, 250 lbs.

I N S T R U C T I O N S

F O R A S S E M B LY

It is very important that you read all instructions

S P E C I F I C A T I O N S