Data Video ITC-100 Manuale di istruzioni - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per Sistema interfonico Data Video ITC-100. Data Video ITC-100 16. 8 way intercom talk back system
Stampa la paginaMIC MODE
DYNAMIC
CONDENSER
MIC
ALL
1
2
3
4
5
6
7
8
MUTE
VOLUME
MIN
MAX
SPEAKER
LIGHT 12V
XLR Microphone Socket
Combined XLR / ¼" (6.3mm) Jack Microphone Input for either a
Condenser or Dynamic Gooseneck Microphone. XLR supports
Condenser Microphones ¼" (6.3mm) Jack supports Dynamic.
Headphone Socket
¼ " / 6.3mm Stereo Headphone Socket for conventional
headphones. Plugging in headphones will disable the built-in
speaker
Microphone / Headset Socket
3.5mm Stereo Socket for combined Microphone Headset.
Plugging in a Microphone / Headset will disable the built-in
speaker and the XLR Microphone Input.
ALL Button
Opens communication with all channels. All channels will hear
communication from the operator, or from any other channel
using the TALK button.
Channel Buttons 1~8
Opens communication with individual channels. More than 1
channel can be active at any given time, active channels are
illuminated red.
All active channels will hear any communication from the operator
or from any other active channel.
The buttons will also indicate if any channel is paging, the paging
channel will flash in orange until the page is answered.
MUTE Button
Mutes all communication from the base station or any channel.
N.B. If any channel uses the CALL button the paging tone will still
sound even when the MUTE button is active.
Volume Control
Controls the Volume of the built-in speaker or outputs to the
headphones or mic/headset according to what is connected
Built-In Speaker
Sounds audible alert when a channel is paging and provides
audio during talkback conversations. Speaker is mute when
headphones or mic / headset are connected to the ITC-100
12V Light Socket
12V Powered light socket for gooseneck light (supplied).
ITC-100
Instruction Manual
7