Data Video TP-600B Manuale di istruzioni - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per Professional Video Accessories Data Video TP-600B. Data Video TP-600B 20. Prompter kit for eng cameras

Stampa la pagina

Assembly

1. Attach/screw the tripod's own quick release

plate to the screw holes on the base of the

TP-600 ENG Prompter rail, item A.

The long slot will be to the rear of the

camera position and the four holes in the rail

will be towards the lens of the camera.

Tip: Add a second screw (not supplied)

through the quick release plate. This to stop

the Prompter Frame from being able to spin

on top of the quick release plate.

2. Now slide and secure the tripod plate, with

prompter rail, item A, onto the head of the

tripod or dolly.

3. Use the hand screws item C, to secure the

lower part of the ENG Prompter Frame item

B in place using the counter sunk holes in

the main part of the frame item A.

Note: There should be two holes left free in

front of this mounting position for the Glass

frame.

4. There are four adhesive Velcro straps

packed inside the Snood/Hood, item I. Peel

off the white paper backing before applying

these straps to the Glass Frame, item G.

Apply the two long Velcro strips to the Glass

Frame edges on the Left side and Right

side. Then apply the two smaller Velcro

strips to the Bottom Left and Right sides of

the Glass Frame edge.

Be careful not to cover any screws and

keep them straight.