Cavalry CADA-U3E4 Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Involucro Cavalry CADA-U3E4. Cavalry CADA-U3E4 14. 4-bay usb 3.0 raid external

GETTING STARTED

PRODUCT PART IDENTIFICATION

1. Interface LED

2. Power Button

3. HDD Trays (4)

4. HDD Status LEDs

Power Supply

The tool-less drive-bays are designed to be secure and have as few

parts as possible. However, accomplishing this requires that the user

have a strong grasp! To remove the drive bays, pinch the front handle

firmly until you are able to compress the blue plastic levers inside.

Next pull back slowly until you feel the blue plastic levers clear the

edge of the case. Now slide the drive bay all the way out of the

endclosure.

The image to the left shows you the potential drive placement.

To remove and replace the internal HDD, gently pry the blue retainer

pins from both sides of the HDD. Set the tray down and continue with

your swap.

The

CADA-U3E4

already setup an active 4-disk array, be careful not to insert any new

drives. The automatic rebuild function will incorporate any new drives

into the existing array. That means any existing data on the new drive

will be wiped clean to accommodate the active array!

USB 3.0 Cable

5. Reset/Set Up Button

6. Mode Setting Switch

7. eSATA Connector

8. USB 3.0 Connector

9. HDD Power Switch

10. Power DC In

is designed to be hot-swappable. But if you have

CADA4-U3E

CHAPTER

10.