Elsema GLR2701SS Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Ricevitore Elsema GLR2701SS. Elsema GLR2701SS 6. Receiver with open collector output

GLR2701SS, GLR2702SS

1 & 2-Channel 27MHz Gigalink™ Receiver with Open Collector Output

Features

• One or two channel outputs

• Open Collector Output

• Available with either a Molex female or terminal block connector.

• Uses Gigalink technology, this involves using a receiver cable to

program the transmitter. Some transmitters and receivers are

programmed through the air. This is very risky since another person

can grab your code.

Applications

• Security, wireless activation/deactivation of domestic or industrial alarms

• Gate operation

• Panic buttons

• Remote Activation of lights

• Simultaneous operation of multiple on/off functions

Description

The GLR2701SS and GLR2702SS use the advanced GIGALINK™ technology to combine the decoding

system and FM receiver to form the new GIGALINK™ Strip receiver. The receiver user has the choice of one

or two channel outputs. The GLR2701SS has a single channel output and GLR2702SS has two channel outputs.

The outputs are solid state using the BC337 transistor with open collector. When the outputs are switched to

ground the receiver receives the correct code from the GIGALINK™ transmitter.

The GLR2701SS and GLR2702SS are available with either a terminal block or the Molex female connector.

The terminal block is used for connecting your external wires such as the supply and the antenna, using the

screw type connection.

The six-way female connector is used to integrate a 27MHz receiver onto a printed circuit board. The six-way

male connector is soldered onto the printed circuit board, requiring the 27 MHz receiver. The male connector is

available from Elsema as a Nylon 6-way male low profile connector, part number 6WLP or high profile

connector part number 6WHP. See design dimensions page for more details.

Code Programming

For code programming, please refer to the separate programming instructions.

1 & 2Channel 27MHz GIGALINK™ Receiver with open collector outputs, GLR2701SS,GLR2702SS

- 1 -

ELSEMA