Cayin CS-100A Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Cayin CS-100A. Cayin CS-100A 17. Vacuum tube integrated amplifier
Stampa la pagina
Front Panel
1
.
Power Switch
1
Used to switch on/off the amplifier.
Note: Unplug the power cord if you're not going to
use the product for an extended period of time.
2. Power indicator
Turn on the amplifier the power indicator will be
on.
3. Bias Selector Switch(A1、A2、A3、A4 、
B1、B2、B3、B4)
Used to select corresponding tube for bias
adjustment.
4. Power Indicator/Mute Indicator
Used to indicate the working state. The indicator
will be on when it is working normally. The
indicator will flicker for 30 seconds when it delays
to work. The indicator will keep flickering when it
is at mute state.
5.Volume Knob
Used to control volume
6.
Input Selection Indicator
You can hear sound from LINE1 when LINE1
indicator is on.
7
2
3
Diagram 1：CS-100A FRONT
6
4
5
You can hear sound from LINE2 when LINE2
indicator is on.
You can hear sound from LINE3 when LINE3
indicator is on.
You can hear sound from PRE-IN when PRE-IN
indicator is on.
Cayin CS-100A has memories and it will default
last operation state when turning on.
7.Triode/ Ultralinear
It is at triode working state if the TR indicator is
on.
It is at ultralinear working state if the UL indicator
is on.
Cayin CS-100A has memories and it will default
last operation state when turning on.
8.
IR Remote Sensor
Used to receive the code of remote control.
9. Input Selector Knob
Used to select four kinds of audio
sources.The input selection indicator will be
on according to the input audio sources.This
function can be operated on the remote
control.
7
8
9