Elsner CasaConnect KNX Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Sistemi di controllo Elsner CasaConnect KNX. Elsner CasaConnect KNX 2. Control center

Stampa la pagina

First setting steps at the control center

Network connection (internet)

The CasaConnect KNX Control Center is internet-ready and can be connected

to a network by cable (Ethernet/LAN) or WiFi (WLAN). The network connection is

needed for:

•

Use of Apps (with smartphones and tablets in the same network/WLAN)

If the CasaConnect KNX is also connected to the internet via the internal net-

work, the following functions are also possible:

•

Accessing web contents in the control center's browser (also e.g.

streaming)

•

Remote access (e.g. for system set-up, diagnosis)

The Ethernet/LAN connection socket can be reached after the display has been ac-

cepted. Note the information regarding assembly.

Protect your network with the latest encryption technology

and change passwords regularly!

Set up network connection

 System > System settings> Internet

Connection status:

Shows the current status (disconnected or connected).

Connection type:

Tap the field to set up the connection (Ethernet or WiFi).

WLAN: Wireless connection. If WLAN has been confirmed, the additional field

"Network name" is displayed for the additional set up.

Ethernet: Cable connection via the LAN socket on the circuit board. No further set-

tings necessary.

Network name (SSID):

The network is selected and set up here under the setting WLAN. Enter a network

name or touch "Find networks" in order to see all the available networks.

Create connection:

You can only "Create connection" using this touch field once a network has been

selected. The password for the network is requested.

If required, you can disconnect the connection again using the same button.

Mac address:

The MAC address (Media-Access-Control address) is the hardware address of

each single network adapter and serves as the unique identifier of the device in

the network. This is also called the physical address or device address.

Remote setup / remote maintenance

Access to the CasaConnect KNX Control Center is possible via the internet us-

ing the remote maintenance function. There must be an internet connection (see

chapter Network connection (Internet)). A service technician can then see and

change the settings without being on site.

Access to the control center is only possible if remote maintenance is also started

on the device. This is not a remote control option! If you want to operate the con-

trol center and your building technology when on-the-go, then use the CasaCon-

nect KNX App and set up a secure VPN connection to your building network.

 System > System setting > Service > Remote maintenance

Start remote maintenance software:

The software opens. Follow the instructions. To create the connection, the device

ID of the CasaConnect KNX must be input at the PC used for the remote main-

tenance. Then every menu and function of the CasaConnect KNX can be viewed

and controlled from the PC.

End remote maintenance software:

Ends an active remote maintenance session.

Use SD card

The CasaConnect KNX Control Center can load data from a

micro SD card. The SD card storage is needed for:

•

Screen saver data

•

Update files for software updating

•

Saving settings (configuration file)

The card socket is located on the right-hand side of the device.

The SD card is pushed into the slot, until it clicks into place.

To remove, briefly press the card into the socket so that is jumps

out.

Update software (Updates)

The software for the CasaConnect KNX Control Center can be updated during

normal operation. If the control center are connected to the internet, the control

center download updates automatically after confirmation. Alternatively, you load

the new software from the Elsner Elektronik website and save it to the SD card.

After inserting the SD card into the socket on the CasaConnect KNX, continue.

 System > System settings > Device information

CasaConnect KNX Control Center

Check for updates:

Shows the currently installed version and facilitates the installation of SD card or

the search for updates on the internet. Follow the download and installation in-

structions on the display.

Screen saver (slide show)

The CasaConnect KNX can display picture file, time/temperature as a screen

saver or simple a black screen. The screen saver is activated if the display has not

been touched for 5 minutes. To start the screen saver manually, stay in the circle

in the bottom navigation bar for a longer period.

In addition, the screen brightness can be adjusted automatically to the ambient

brightness and the screen can switch off when it is dark.

 System > System settings > Settings

Screen:

Shows which screen saver is currently active and whether automatic brightness is

switched on.

Select the screen saver:

•

Without

•

Black screen

•

Time / temperature display

•

Picture display (slide show or single picture)

In order to show digital picture data as a slide show, save the files to a micro SD

card. The picture files must fulfil the following requirements:

•

The files must be saved in the top directory level on the card (master

directory)

•

File format: Bitmap (BMP, without RLE compression), Jpeg (JPG), GIF or

PNG (without transparency)

•

For pictures with a page ratio other than 16:10, black bars are added to the

top and bottom or left and right. The display has a resolution of 1280 × 800

pixels

•

Colour intensity 24 bit or 16 bit

If picture data is saved on the card, the "Slide show" button is displayed on the

right of the upper menu bar, with which you can directly start it. The image chang-

es approx. every 45 seconds (for images with 24-bit colour intensity). To interrupt

the screen saver, touch the screen or remove the SD card.

Internet (browser)

The CasaConnect KNX Control Center has a browser for accessing internet

pages on the WorldWideWeb. Music and video streaming services can therefore

also be used. There must be an internet connection in order to use these functions

(see chapter Network connection (Internet)).

Start the browser via "Open website" in the top menu bar. Enter the web address

(URL). Navigate by touching the screen (touch display).

Websites can be shown in the display area on the right or as full screen. The switch

field is located on the lower edge of the display. The "Create bookmark" button is

also located here. With this, you create a link (bookmark button) in the start menu

beneath the system and manual functions, through which the website can be ac-

cessed quickly.

You can edit the name of a bookmark later in the menu:

 System > Set screen > Start page > Bookmark

You can also delete individual bookmarks here.

PDF documents cannot be displayed or downloaded in the browser of the Casa-

Connect KNX Control Center.

CasaConnect KNX App

The CasaConnect KNX App is available for Android and for iOS free of charge

in the respective App stores.

Install the App on the mobile device. As soon as the mobile device and CasaCon-

nect KNX are in the same network (WLAN), the CasaConnect KNX Control

Center can be remote-controlled using the App.

Up to nine mobile devices can be connected with the CasaConnect KNX Con-

trol Center at the same time.

Access via the App to the control center can be password-protected or completely

prevented.

System > System settings> Access codes

Access code

If you want to operate the control center and your building technology when on-

the-go, then use the CasaConnect KNX App and set up a secure VPN connec-

tion to your building network. App access via VPN only works after the App has

been used once in the internal WLAN. IP address assignment should be set in the

internet router for DHCP so that the same IP address is always assigned.

If two CasaConnect KNX control centers are installed in the building, they must

be connected to different WLAN networks so that App control is possible.

Maintenance and care

WARNING!

Risk of injury from automatically moving components!

System parts may start automatically as a result of the automatic

controls and can put people in danger.

•

Always disconnect the system from the mains power before

maintenance or cleaning.

CasaConnect KNX Control Center • Version: 21.01.2021 • Technical changes and errors excepted. • Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany • www.elsner-elektronik.de • Technical Service: +49 (0) 7033 / 30945-250

Abrasive / detergent cleaning agents and aggressive care products must not be

used for cleaning. Remove fingerprints from the touchscreen ideally using a wet

cloth or a microfibre cloth. Use the cleaning mode for this.

 System > System settings > Cleaning mode

If there is a power outage, the data entered by you is saved for approx. 10 years.

A battery is not required for this. The clock has to be reset after mains power has

been restored. This is done automatically if a time signal is received.