Datalogic DS2x00N-DS4800 Series Procedura di impostazione mediante la programmazione dei codici a barre - Pagina 3
Sfoglia online o scarica il pdf Procedura di impostazione mediante la programmazione dei codici a barre per Lettore di codici a barre Datalogic DS2x00N-DS4800 Series. Datalogic DS2x00N-DS4800 Series 20.
Stampa la pagina1. Press and hold the X-PRESS™ button to enter the "AutoLearn Mode". Once button is
pressed, the LED cycle appears as follows:
READY
GOOD
SETUP
TRIGGER
LEARN
COM
TEST
STATUS
Just pressed.
2. Now, put the barcode related to the planned role and address in front of the scanner.
The picture below shows, as example, the scanner configuration as "Slave 1"
3. Once the scanner has successfully read the code, the LEDs stay on steady for 2
seconds:
1
the barcodes shown are examples, only. Use the barcodes in the Network Layout Barcodes paragraph for the
actual programming.
READY
GOOD
SETUP
TRIGGER
LEARN
COM
TEST
STATUS
After 2 seconds.
SETUP
LEARN
TEST
Successful reading.
Setup Procedure Using Programming Barcodes
READY
GOOD
SETUP
TRIGGER
LEARN
COM
TEST
STATUS
After 4 seconds.
Release the button to
enter the AutoLearn
Mode.
READY
GOOD
TRIGGER
COM
STATUS
READY
GOOD
SETUP
TRIGGER
LEARN
COM
TEST
STATUS
The laser beam turns ON
and the yellow LEARN
LED blinks: the
AutoLearn Mode is
working.
1
:
Slave 1
3