Cayken KCY-28DM Istruzioni per l'uso - Pagina 6

Sfoglia online o scarica il pdf Istruzioni per l'uso per Trapano Cayken KCY-28DM. Cayken KCY-28DM 8. Industrial equipment

Stampa la pagina

VERSATILE MAGNETIC DRILL

1>VERSATILE MAGNETIC DRILL SPECIFICATIONS(OIL IMMERSED)

Specifications

KCY-36 2WDO

Core Cutter

Twist Drill

Tapping

M15

Voltage

110/220~

Magnetic Adhesion

14200

Input

1550

Position speed

100-300 560

95-235/180-480

rpm

Tool Holder

You can choose following cutters:

Core Cutter

Countersunk

Notice In order to constantly improve products, our company reserves the

right to change technical data without prior inform.

2>VERSATILE MAGNETIC DRILL ADVANTAGE

The features of machine: small size, light weight, high efficiency, multi-gear mechanical gear

speed control device, it can be used for many purposes. The feature of motor: constant power,

soft start, electronic stepless speed control, overload protection. Etc.Multifunctional magnetic

drill can be used in construction sites or workshop, can be used for twist drill, hollow drill, and

reaming, bearizing, tapping, or cutter. Also in the implementation of tough job, as in the pipe,

anti-magnetic surface or on the complex structure of the material drilling, choosing a good

model can also be maintained in good working condition and the efficient and economical way

of working.

KCY-48 2WDO

KCY-65 2WD

KCY-85 3WD

M18

M20

110/220~

14500

15800

1700

1890

100-180/500

100-210/330/500

Twist Drill

Tappin

Milling cutter

3>APPLICATION

While drilling on horizontal level, move the machine to the workpiece, then plug in. Turn on

the magnetic control switch, fit on the bit after the magnetic base fixed firmly, and then rotate

the handle to move the bit to the workpiece. Turn on the motor switch to drill. Keep the load

around 0.05mm/r. Do not overexert in case of overload.

While drilling on the side face, we need two operators, and one guardian as well. Move the

machine to the workpiece, then plug in. Turn on the magnetic control switch until the magnetic

base fixed firmly(the operator need to hold the machine during this period), and then fasten

M24

the safe belt in case of sudden dropping. Fit on the bit, rotate the handle to move the bit to

the workpiece and then turn on the motor switch to drill. Keep the load around 0.05mm/r.

Do not overexert in case of overload.

16800

While drilling on top surface, we also need two operators, and one guardian as well. Try not

2280

to drill on this way. While choosing this way, take some corresponding protection consider the

fastness and the scrap iron. As to other ways, operators can use flexibly according to the situat-

ion. But do consider the safety.

4>POSITION DESCRIPT

IMAGE 1

Shift when the machine stops or will stop

Shift in place If the spindle doesn

starting up the gear may not shift in place Turn off the machine im

mediately and then shift the gear to proper place rotate the spindle

back and forth easy to shift at the same time till shift in place

Do not shift when the machine is full speed operated over load or stuck

IMAGE 1

1.Low-speed gear:

speed Low speed to high speed turn the knob clockwise otherwise anti clockwise

—LOW SPEED: For hard materials, large drill bit (cutter tools), tapping

—HIGH SPEED: For soft material, small drill bit holder. (cutter tools)

(M)

IMAGE 2

t rotate or there is somenoise after

(

)

, high-speed gear:

, medium-speed gear. The drawing is for low