4IPNET APM100 Manuale d'uso - Pagina 18
Sfoglia online o scarica il pdf Manuale d'uso per Controllore 4IPNET APM100. 4IPNET APM100 20. Access point
Stampa la paginatime is manually configured.
5.1.2
Backup System
General Backup: Simply click the "Backup"
button to save the system configuration as an
encrypted .db file to your PC/laptop.
Restore System
Restore System Settings: Click "Browse" to
specify backed-up .db file to the system. In the
meantime, restoring previous db configurations
may be performed with checking options.
Reset to Default
Reset to Factory Default: This action will
erase all configurations and restore the system
to the factory setting.
5.1.3
Current Version: The administrator can
obtain the latest firmware from the 4ipnet's
Partner Center or 4ipnet's Support Team.
Upgrade New Firmware: Click "Browse" to
search for the firmware file on your local drive
and click "Upload" to firmware upgrade. The
system needs to be restarted afterwards to
activate the new firmware.
Upgrade Firmware Via FTP: The other option
by entering the FTP server IP address, FTP
server port, and the FTP account name and
password, and lastly specify the complete
firmware filename stored on the FTP server that
will be used to upgrade the system.
5.1.4
The administrators can manually restart the
system by clicking the "Apply" button, and state
the "Reason for Restart" so it can be recorded in
the Configuration Change Log for maintenance
purposes.
Copyright © 2017, 4ipnet, Inc. All rights reserved. All other trademarks mentioned are the property of their respective owners.
Backup/ Restore
Firmware Upgrade
Restart
APM100 Access Point Controller
5.2 WMI Management Access
The administrator can grant access to the WMI
by specifying a list specific IP addresses or
ranges of IP addresses in web-based or in
console-based.
The Management IP Address displays the
following tabs:
Management Service
Management IP Address List
Management Service
SSH Service: The encrypted remote console
interface in port 22. For security purposes, SSH
Service is disabled by default to prevent
malicious users from accessing the system.
Telnet Service: The non-encrypted remote
console interface in port 23. For security
purposes, Telnet Service is disabled by default
to prevent malicious users from accessing the
system.
Management IP Address List
For remote access purposes, the IP Address/
Segment can be customized for the
administrators to access the WMI of the system.
Please confirm the entries as Active in the table
by switching to ON. For example, entering
"192.168.3.1" and "192.168.1.0/24" means
that only the device at 192.168.3.1 and devices
in the range of 192.168.1.0 to 192.168.1.255
can reach the web management interface.
User Manual ENGLISH
18