Elsner KNX PS640-IP Installazione e regolazione - Pagina 16
Sfoglia online o scarica il pdf Installazione e regolazione per Alimentazione Elsner KNX PS640-IP. Elsner KNX PS640-IP 20. Power supply system with ethernet interface
Stampa la pagina
Routing (KNX -> IP)
Group telegrams (main group 0 to 13)
Block: No group telegrams of this main group are routed to IP.
Route: All group telegrams of this main group are routed to IP independent of the filter
table. This setting is for testing purposes only.
Filter: The filter table is used to check whether or not the received group telegram
should be routed to IP.
Group telegrams (main groups 14 and 15)
Block: No group telegrams of main groups 14 and 15 are routed to IP.
Route: All group telegrams of main groups 14 and 15 are routed to IP.
Group telegrams (main groups 16 to 31)
Block: No group telegrams of these main groups are routed to IP.
Route: An additional page appears on which the routing of main groups 16 to 31 can be
disabled or enabled in pairs.
Note: The group addresses of main groups 16 to 31 are reserved addresses that can be
used for special applications (e.g. in Easy Mode). These group addresses are not
available in the ETS.
Physically addressed telegrams
Block: No physically addressed telegrams are routed to IP.
Route: All physically addressed telegrams are routed to IP.
Filter: The physical address is used to check whether the received physically addressed
telegram should be routed to IP.
Broadcast telegrams
Block: No received broadcast telegrams are routed to IP.
Route: All received broadcast telegrams are routed to IP.
16
block • route • filter
block • route
block • route
block • route • filter
block • route