Dust Free 350 SERIES Manuale di installazione e assistenza - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione e assistenza per Pulitore d'aria Dust Free 350 SERIES. Dust Free 350 SERIES 7.

OPERATING CONTROL SYSTEM

OPERATING FAN/ON/OFF SWITCH

To turn the Series 350 on rotate the fan control clockwise to low, medium or high setting,

depending on the amount of air flow desired. The Series 250 has a continuous variable speed

control. When the unit is on the red indicator light, located above the fan control will light up. To

turn the unit off, rotate fan control counterclockwise to off position. The red indicator light will go

off.

OPERATING THE TRICKLE SWITCH

The trickle switch is intended to be used when a steady, slow flow of ozone is desired. This

should be used in place of the standard timed, regulated ozone cycle. To operate, simply push

the trickle switch to the on position.

OPERATING THE MINUTES CONTROL/TIMER SWITCH

When a timed ozone cycle is desired rotate the minutes control and line up the white line on the

knob to the desired time allotment. Push the timer switch to the on position. The unit will now

begin generating ozone for the amount of time indicated.

OPERATING THE O AMOUNT CONTROL

To adjust the amount of ozone being generated during the timed cycle, rotate the O amount

control to the desired position, hi, low or off. No ozone will be generated when this control is set

to the off position, unless the alternate trickle method is being employed. If you can detect the

odor of O (ozone) the concentration level is too high. Reduce the O output or turn off the

generator.

Control System Panel

Red Indicator

Light

(Optional EON-equipped model shown.)

OFF

TRICKLE

MED

OFF

FAN

(Only on EON-equipped models)

MINUTES

TIMER

(Only on EON-equipped models)

OFF

O AMOUNT