Dust Right Vortex Istruzioni per l'utente - Pagina 3

Sfoglia online o scarica il pdf Istruzioni per l'utente per Aspirapolvere Dust Right Vortex. Dust Right Vortex 4.

Fig. 1

Fig. 3 - Underside of lid shown

Assembly

1. Snap the five casters (G) into the corresponding

sockets on the bottom of the canister. Fig. 1.

2. Position the Lower Chip Separator Ports (F)

underneath the lid with the indents on the Lower

Port aligned with the indents on the lid. Fig. 2. Be

sure the Lower Ports are pointing in opposite

directions. Fig. 3. Then Thread the Upper Chip

Separator Port (E) to the Lower Port (F), sandwiching

the lid (A) in between.

Fig. 2

Fig. 4

3. Snap Vortex

Lid (A) onto Vortex

™

4. Thread both hose fittings (D) to either end of

Flexform

™

hose (C).

Note: Threading is reversed on these fittings.

5. Insert one end of the Flexform

Chip Separator Port (E) and the other end into your

shop vacuum. Fig. 4.

Note: Either end can be used as the input or

output ports.

Triangle

indent

Canister (B).

™

hose (C) into

™