CB2 WALNUT Istruzioni per il montaggio - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per il montaggio per Arredamento per interni CB2 WALNUT. CB2 WALNUT 5. Low dresser
Anche per CB2 WALNUT: Istruzioni per il montaggio (4 pagine)

Stampa la pagina
walnut
A
partition
B
side panel
A. Insert 4 wood dowels and 2 cams into
partition as shown. Make sure arrow on each cam
point toward nearest edge with holes.
B. Insert 4 wood dowels 2 cams into right and
1
left side panels as shown.
NOTE: Make sure
grooves of side/bottom
panels are assembled
on the same side
during assembly
B
NOTE: Make sure the
drawer glides pull out away
from back grooves of side/bottom
panels during assembly
A. Position bottom panel upright. Fit dowels of side
panels and partition into bottom panel as shown.
B. Using a screwdriver, secure side panels and
partition with 9 medium bolts, 9 spring washers
3
and 9 flat washers.
Made in Vietnam - r04
LOW DRESSER
NOTE: Make sure arrow
on each cam points
toward nearest edge
with holes
B
A
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
B
A
NOTE: Do not
over tighten
the bolts
A. Attach 4 legs to bottom panel with 2 small
bolts per leg as shown. Secure, but do not over
tighten, bolts with a phillips head screwdriver.
B. Insert support leg to bottom panel. Turn
2
clockwise to secure.
Insert back panel into grooves of side panels and
4
bottom panel as shown.
A
Page 2 of 5