Datalogic S70-5-E3-PI Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Accessories Datalogic S70-5-E3-PI. Datalogic S70-5-E3-PI 10. Analogue output

MOUNTING INSTRUCTIONS

Mount on a DIN Rail

1. Hook the DIN rail clip on the bottom of the S70 over the edge of

the DIN rail (1).

2. Push the S70 up on the DIN rail (1).

3. Pivot the S70 onto the DIN rail, pressing until it snaps into

place (2).

Remove from a DIN rail

1. Push the S70 up on the DIN rail (1).

2. Pivot the S70 away from the DIN rail and remove it (2).

INSTALLING THE FIBERS

Follow these steps to install glass or plastic fibers.

1. Open the dust cover.

2. Move the fiber clamp forward to unlock it.

3. Insert the fiber(s) into the fiber port(s) until they stop.

4. Move the fiber clamp backward to lock the fiber(s).

5. Close the dust cover.

When connecting coaxial-type fiber assemblies to the amplifier, install the solid core fiber to the LED emitting port, and the multi-core

fiber to the PD receiving port for most reliable detection.

Single-core fiber

RECEIVER

Multi-core fiber

EMITTER

Move forward to release the fibers

Fiber Clamp

Fiber Receiver Port

Fiber Emitter Port