Datalogic SG-LP SERIES Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Accessories Datalogic SG-LP SERIES. Datalogic SG-LP SERIES 4.

SAFETY PRECAUTIONS

NOTE: The SE-SP laser pointer uses a red laser light beam that can be potentially dangerous to the

human eye.

Do not stare directly at the light beam.

The laser pointer is powered by two 1.5 V AAA type batteries, take care to respect right polarity.

Battery replacement:

With a common cross head screw driver remove the 2 TSP UNI

7688 M2,5x8 screws from bottom closing cap then remove it to

have access to the battery box.; put off the battery box, extract the

two batteries and replace with new ones. Place the battery box in its

place, close with the cap and firmly tighten the screws (Fig. 1).

Fig.1

INSTALLATION



Install the emitting and receiving units of the SE/SG series safety device in the defined positions (refer to

MECHANICAL MOUNTING chapter of the safety light curtain instructions manual). The use of floor

stands is recommended, verifying that they are firmly fixed and that their axis is perpendicular to the floor.



SG-LP laser pointer is installed on SG and SE safety light curtains profiles using one of the two lateral

grooves. Depending on which kind of fixing bracket is used, laser pointer can be mounted side way or

slotted from the top. Side mounting is compulsory when the accessory is installed on SG curtains with

TOP-BOTTOM rotating brackets.

 Exhausted batteries are designated for separate collection at an

appropriate collection point.

 Do not dispose of as household waste.

 For more information, contact the local authorities in charge of

waste management.

INSTRUCTIONS